Hinged Print Lifters Scaled

Our 1.5" x 2" Scaled Hinged Lifters are made from .005" thick, crystal clear, adhesive-backed mylar that is hinged to .01" thick vinyl backing cards. The backing cards are available in white, black, or transparent. Pertinent information pertaining to the print can be recorded on the reverse side of the lifter.

The 1.5" x 2" Scaled Hinged Lifter has a scale along the bottom and right sides measuring 40 mm x 23 mm. 24/box.

After developing the print, simply peel off the inside release liner to expose the adhesive, "lift" the print, then close the mylar against the vinyl backing card to permanently secure it.